Configuring Qinq - Zte ZXR10 5900 Series User Manual

Step Command
1
ZXR10(config-if)#
{normal|uplink|customer|tpid <tpid>}
2
ZXR10(config)#
Example
Isolated group 2: gei_1/3,gei_1/4 and gei_4/1 are isolated ports,
gei_1/5,gei_1/6 and gei_5/1 are community ports, gei_1/11 and
gei_1/12 are promiscuous ports.
The detailed configuration is as follows:
ZXR10(config)#vlan private-map session-id 1 isolate
gei_1/1-2,gei_2/1,gei_3/1 promis gei_1/10
ZXR10(config)#vlan private-map session-id 2 isolate
gei_1/3-4,gei_4/1 promis gei_1/11-12 community gei_1/5-6,gei_5/1
ZXR10(config)#show vlan private-map
Session Isolate_Ports Promis_Ports Community_ports
------------------------------------------------------------------
1 gei_1/1-2,gei_1/10
_2/1,gei_3/1
2 gei_1/3-4,gei_1/11-12
_4/1
ZXR10(config)#

Configuring QinQ

switchport <port-list> qinq
show qinq
In , assume switch A's customer port is gei_1/1, its uplink port is
gei_1/24, switch B's customer port is gei_1/1 and its uplink port
is gei_1/24.
Configuration of Switch A:
ZXR10_A(config)#vlan 10
ZXR10_A(config-vlan)#exit
ZXR10_A(config)#interface gei_1/1
ZXR10_A(config-if)#switchport qinq customer
ZXR10_A(config-if)#switchport access vlan 10
ZXR10_A(config-if)#exit
ZXR10_A(config)#interface gei_1/24
ZXR10_A(config-if)#switchport qinq uplink
ZXR10_A(config-if)#switchport mode trunk
ZXR10_A(config-if)#switchport trunk vlan 10
ZXR10_A(config-if)#exit
Configuration of Switch B:
ZXR10_B(config)#vlan 10
ZXR10_B(config-vlan)#exit
ZXR10_B(config)#interface gei_1/1
ZXR10_B(config-if)#switchport qinq customer
ZXR10_B(config-if)#switchport access vlan 10
ZXR10_B(config-if)#exit
ZXR10_B(config)#interface gei_1/24
ZXR10_B(config-if)#switchport qinq uplink
ZXR10_B(config-if)#switchport mode trunk
ZXR10_B(config-if)#switchport trunk vlan 10
ZXR10_B(config-if)#exit
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 VLAN Configuration
gei_1/5-6,gei_5/1
Function
When configuring QinQ, it
needs to set customer port of
SPVLAN to untagged port and
uplink port to tagged port.
This views configuration
information of QinQ.
Vlan_Cfg Vlan
11