Show (Network); Mac-Address-Table Show - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Example

show (network)

This command is used to show configuration information of current
interface.
show [<configuration>|<vlan-config>]
Parameter
<configuration>
<vlan-config>
To show detailed configuration attribute of interface gei_5/6, exe-
cute the following command:
# show configuration
To show detailed configuration attribute of interface Vlan100, ex-
ecute the following command:
# show vlan-config

mac-address-table show

This command is used to show content of MAC address table, in-
cluding static MAC address table and dynamic MAC address table.
mac-address-table show [num <number1> page <number2
>]|[address <macaddress>][vlan <number3>][interface <stri
ng>][<total>]
Parameter
<number1>
<number2>
<macaddress>
<number3>
<string>
To show all details of MAC address table, execute the following
command:

# mac-address-table show

Confidential and Proprietary Information of ZTE CORPORATION
Description
This shows configuration information of
physical interface.
This shows configuration information of VLAN
virtual interface.
Description
This is one number, showing the number of
ARP entries displayed on each page, in range
of 1-100.
This is one number, which is the start page
number of mac address table, in range of
1-65535.
This is one MAC address string, in format of
xx:xx:xx:xx:xx:xx.
This is one string, specifying VLAN name, in
format of vlan.xxxx.
This is one interface name string, such as
gei_5/6.
Chapter 10 network
107