Show Banner Motd; Set Banner Motd - Enterasys SECURESTACK C3 Configuration Manual

show banner motd

Use this command to show the banner message of the day that will display at session login.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the banner message of the day:
C3(rw)->show banner motd
Use of this system is strictly limited to authorized personnel.

set banner motd

Use this command to set the banner message of the day displayed at session login.
Syntax
set banner motd message
Parameters
message
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the message of the day banner to read: "This system belongs to
XYZ Corporation. Use of this system is strictly limited to authorized personnel."
This system belongs to XYZ Corporation.
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
Specifies a message of the day. This is a text string that needs to be in
double quotes if any spaces are used. Use a \n for a new line and \t for a
tab (eight spaces).
show banner motd
SecureStack C3 Configuration Guide 3-25