Copy - Enterasys SECURESTACK C3 Configuration Manual

Parameters
filename
append
Defaults
If append is not specified, the current running configuration will be replaced with the contents of
the configuration file, which will require an automated reset of the chassis.
Mode
Switch command, read‐write.
Example
This example shows how to execute the "Jan1_2004.cfg" configuration file:
C3(su)->configure configs/Jan1_2004.cfg

copy

Use this command to upload or download an image or a CLI configuration file.
Syntax
copy source {destination | system:image}
Parameters
source
destination
system:image
Defaults
None.
Mode
Switch command, read‐write.
Usage
SFTP and SCP can only be used to transfer configuration files or the logs/current.log file. You
cannot use SFTP or SCP to download images (system:image).
Specifies the path and file name of the configuration file to execute.
(Optional) Appends the configuration file contents to the current
configuration. This is equivalent to typing the contents of the config file
directly into the CLI and can be used, for example, to make incremental
adjustments to the current configuration.
Specifies location and name of the source file to copy. Options are a local file
path in the configs or logs directory, or the URL of a TFTP,
server.
or Secure Copy (SCP)
Specifies location and name of the destination where the file will be copied.
Options are a local file path in the configs directory, or the URL of a TFTP,
server.
SFTP, or SCP
The required destination of an image file.
Note: Only TFTP can be used to download an image file.
Secure FTP (SFTP),
SecureStack C3 Configuration Guide 3-45
copy