Show Logging Buffer; Show Logging Interface - Enterasys SECURESTACK C3 Configuration Manual

Example
This example shows how to clear local logging:
C3(su)->clear logging local

show logging buffer

Use this command to display the last 256 messages logged. By default, critical failures and user
login and logout timestamps are displayed.
Syntax
show logging buffer
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows a portion of the information displayed with the show logging buffer
command:
C3(su)->show logging buffer
<165>Sep
<165>Sep
(telnet)

show logging interface

Use this command to display the interface used for the source IP address of the system logging.
Syntax
show logging interface
Parameters
None.
Defaults
None.
Mode
Switch mode, read‐only.
4 07:43:09 10.42.71.13 CLI[5]User:rw logged in from 10.2.1.122 (telnet)
4 07:43:24 10.42.71.13 CLI[5]User: debug failed login from 10.4.1.100
show logging buffer
SecureStack C3 Configuration Guide 14-11