Panasonic DBS-576 Technical Manual page 77

Section 400-Programming
Introduction
Hot Line/MCO Preference for "ON/OFF" Key
(all CPCs) - Version 1.0 or higher
Set whether system will seize an MCO trunk when ON/OFF is pressed on a
0
digital keyphone.
System
Configuration
FF1
System
FF2
Trunks
Notes:
If set to "1" (seize MCO trunk), an FF-key must be assigned for intercom calls (Headset feature).
FF3
Related Programming:
Extensions
MCO Prime Line (pg. 3-21)
FF5 5: Hot Line Group (pg. 5-23)
FF4
FF-/Soft Keys
Programming Mode Entry
FF5
(all CPCs) - Version 1.0 or higher
Groups
Allow/Restrict the ability of the lowest-numbered digital extension port to enter
programming mode (
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
Maintenance
Related Programming:
Dealer Programming ID Code (pg. 1-108)
Appendix A
Appendix B
576-13-400
FF1 0 01 0011 Hold (0 or 1) Hold
FF3 0 BSSC 04 23 Hold (0 or 1) Hold
**
ON/OFF PROG PROG
FF1 0 01 0012 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
0=Disable Hot Line/MCO Preference. (default)
Receive intercom dial tone when ON/OFF is pressed.
1=Enable Hot Line/MCO Preference.
Seize MCO trunk when ON/OFF is pressed.
) without a Log-In Code.
0=Do not allow programming mode entry.
1=Allow programming mode entry without
a valid Log-In Code. (default)
FF1 0 22 0001 Hold (0000-9999) Hold
FF1: System Programming
#)0#"" !!,
$#1  $!
Page 1-15
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B