Ff5 1: Extension Hunt Groups - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF5 1: Extension Hunt Groups

0
System
Configuration
Extension HG Hunt Mode
(all CPCs) - Version 1.0 or higher
FF1
Set the hunting method for each Extension Hunt Group.
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
Notes:
FF5
Groups
Terminal hunting. Calls are directed to the pilot number or member extension. Hunting proceeds
forward through the sequential members until the end of the Hunt Group is reached. The call is then
queued until a member becomes available.
FF6
Pilot Distributed hunting. Calls are directed to the pilot number. Hunting begins at the next sequential
TRS/ARS
member after the member that received the last call. Hunting then proceeds forward through the
sequential members until the member who received the last call is reached. After all members in the
Hunt Group have been tried, the call is queued until a member becomes available.
FF7
Switchback hunting. Hunting begins at the member extension receiving the call. Hunting proceeds
Applications
forward through the sequential members until the end of the Hunt Group is reached, then returns to the
member extension that first received the call, and rings it again. It then hunts backward through the
members until the first Hunt Group member is reached. The call is then queued until a member
becomes available.
FF8
Maintenance
Circular hunting. Hunting begins at the member extension receiving the call. Hunting proceeds
forward through the sequential members until the end of the Hunt Group is reached, then proceeds to the
first member in the Hunt Group. After a complete search of the Hunt Group, the call is queued until a
member becomes available.
Appendix A
Related Programming:
Appendix B
576-13-400
FF5 1 (01-72) 01 Hold (0-4) Hold
Extension Hunt Group No.
NOTE: Available range depends on
the CPC used:
with a CPC-96: Hunt Group No. 01-12
with a CPC-288: Hunt Group No. 01-36
with a CPC-576: Hunt Group No. 01-72
DBS 576 (USA) issued 05/20/98
0=No hunting.
1=Terminal hunting. (default)
2=Pilot Distributed hunting.
3=Switchback hunting.
4=Circular hunting.
(see explanation in Notes below)
NOTE: If this address is reset to "0=No
hunting," the pilot number and members in the
next addresses will be automatically cleared.
FF5: Groups
Introduction
0
Configuration
$
.1 .- 2! 
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 5-13
System