Panasonic DBS-576 Technical Manual page 418

FF3: Extension Programming
Introduction
B-Channel Select
(all CPCs) - Version 1.0 or higher
Set the method used by the system to seize a B-channel for an outgoing call.
0
System
Configuration
FF1
BSSC: Extension Port position
System
FF2
Trunks
Notes:
FF3
Extensions
Related Programming:
FF4
FF-/Soft Keys
FF5
B-Channel Numbering (Layer 3)
Groups
(all CPCs) - Version 1.0 or higher
Select the Layer 3 format of the messaging commands sent by the system/PBX
to the ISDN device.
FF6
TRS/ARS
FF7
BSSC: Extension Port position
Applications
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
FF8
Maintenance
Notes:
When ordering span from CO, specify Slot Mapping or Channel Numbering:
Choose Slot Mapping for multirate (64kbps base rate) bearer capability on a Primary Rate Interface,
Appendix A
when you want to combine channels together -- for example, using many channels to provide a larger
bandwidth for video-conferencing.
Appendix B
Page 3-32
FF3 1 BSSC 03 00 Hold (0 or 1) Hold
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF3 1 BSSC 03 01 Hold (0 or 1) Hold
or 1 (PRI)
DBS 576 (USA) issued 05/20/98
Section 400-Programming
0=System will search for highest-numbered
B-channel; system cannot change
channel. (default)
1=System will search for lowest-numbered
B-channel; system can change channel by
request from ISDN terminal equipment.
0=Slot Mapping (default - U.S./China)
1=Channel Numbering (default - U.K.)
Introduction
$
7'9 ,'
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
$
7'9 2/$
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System