Panasonic DBS-576 Technical Manual page 373

Section 400-Programming
Introduction
Auto Answer Timer
(all CPCs) - Version 1.0 or higher
Set how long the system will wait before opening a voice path
0
when the user makes an outgoing call on this T1 channel.
System
Configuration
FF1
BSSCC: T1 (E&M Tie) Channel Position
System
FF2
Trunks
Notes:
Whether Auto Answer is enabled or disabled on this trunk (see pg. 2-119), the Auto Answer Timer
will begin after the digits are outpulsed.
FF3
If Auto Answer is enabled, the system will wait until the Timer expires before opening a voice path.
Extensions
If Auto Answer is disabled, the system will open the voice path when either: (1) the answer signal is
received from the other end, or (2) the Timer expires -- whichever occurs first.
FF4
FF-/Soft Keys
Related Programming:
Auto Answer for Outbound Calls (pg. 2-119)
FF5
Groups
DTMF/Dial Pulse Dialing
FF6
TRS/ARS
(all CPCs) - Version 1.0 or higher
Set the T1 channel's signaling type for outbound and inbound dialing.
FF7
FF2 2 BSSCC
Applications
BSSCC: T1 (E&M Tie) Channel Position
FF8
B=Cabinet no. 1-6
SS=Slot no. 01-12
Maintenance
CC=Channel no. 01-24
Notes:
Appendix A
Appendix B
576-13-400
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
DBS 576 (USA) issued 05/20/98
02 15 Hold (0-3) Hold
FF2 2 BSSCC 02 05 Hold (0 or 1) Hold
03 00 Hold (0 or 1) Hold
0=Dial-pulse, at 10 pps
1=DTMF (default)
FF2: Trunk Programming (T1 E&M Tie)
$
/-! /) %
0=1 second (default)
1=2 seconds
2=3 seconds
3=4 seconds
$
, %6 $0$7
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-125