Panasonic DBS-576 Technical Manual page 468

FF5: Groups
Introduction
Extension HG Queuing Timer
(all CPCs) - Version 1.0 or higher
Set the amount of time an incoming call is queued in the Extension Hunt Group
0
(waiting for a member to become available) before being forwarded to the next
System
Configuration hunt group or extension.
FF1
System
FF2
Trunks
FF3
Extensions
Notes:
FF4
A call is queued in a hunt group after the idle members are tried (once each) and the remaining members
are busy.
FF-/Soft Keys
If there is no assigned Next Extension/Hunt Group (see next address), intercom and network calls will
be dropped after the Queuing Timer expires. CO calls will return to "multiple CO incoming" status.
FF5
Groups
Related Programming:
Extension HG Next Extension/Hunt Group
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 5-16
FF5 1 (01-72) 24 Hold (0-255) Hold
Extension Hunt Group No.
(available range depends on
system size)
(01-12) for a 96-port system
(01-24) for a 192-port system
(01-36) for a 288-port system
(01-48) for a 384-port system
(01-60) for a 460-port system
(01-72) for a 576-port system
DBS 576 (USA) issued 05/20/98
Queuing Timer:
0=stay in the same Hunt Group (default)
1-255=no. of seconds
FF5 1 (01-72) 25 Hold (0-9999) Hold
Section 400-Programming
$ 
D-- %
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B