Panasonic DBS-576 Technical Manual page 328

FF2: Trunk Programming (ISDN)
Introduction
Night Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the ISDN trunk's delayed-ringing type during Night mode.
0
NOTE: Night Ring Type (pg. 2-77) must be either "DIL" or "Multiple Incoming"
System
to set Night Delayed Ringing (DID and DISA do not apply here).
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
Night Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
FF4
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt Group,
FF-/Soft Keys
depending on the setting in the above address.
.
FF5
Groups
BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF6
C=Circuit no. 1-4 (BRI)
TRS/ARS
FF7
Notes:
(see
Applications
Related Programming:
FF8
Maintenance
Appendix A
Appendix B
Page 2-80
FF2 1 BSSC
BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF2 1 BSSC
(if "1=delay-ring to Extension")
(if "2=delay-ring to Hunt Group")
(if "3=delay-ring to SSD")
or 1 (PRI)
(if "4=delay-ring to Attendant")
"Day1 Delayed Ring Type/Destination" - pg. 2-78
(see "Day1 Delayed Ring Type/Destination" - pg. 2-78
DBS 576 (USA) issued 05/20/98
05 4 Hold (0-4) Hold
0=Disabled; no delayed ringing (default)
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
05 5 Hold (0-9999) Hold
Destination Number:
Ext.No., Virtual Ext.No., or Closed No.
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
default: [no assignment]
)
Section 400-Programming
$ 
)1%  %6
$
) !
)
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B