Ff3 0: Digital Keyphones And Slts - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF3 0: Digital Keyphones and SLTs

0
System
Configuration
Phone Type
FF1
(all CPCs) - Version 1.0 or higher
System
Define the type of phone at the extension port.
FF2
Trunks
FF3
Extensions
Notes:
FF4
The default setting "1=Digital Keyphone or SLT" is automatically detected by the system when the
phone is plugged into the port.
FF-/Soft Keys
DSS/72 consoles and EM/24 units require their own port, separate from the phone. To match them to a
phone, assign the same Extension Number (see next page) to both ports.
FF5
There is no limit on the number of EM/24s per phone system; but not more than one EM/24 unit per
Groups
phone can be assigned.
DSS/72 assignment is limited by the CPC used:
FF6
with a CPC-96:
TRS/ARS
with a CPC-288:
with a CPC-576:
DSS/72s and EM/24s can have Automatic BLF key assignments, if FF1 0 01 0020 is enabled first. See
FF7
pg. 1-19 for more information.
Applications
Related Programming:
Extension Number Assignment (pg. 3-4)
FF8
Automatic BLF on DSS and EM/24 Units (pg. 1-19)
Maintenance
Appendix A
Appendix B
576-13-400
FF3 0 BSSC 00 Hold (1-3) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
max. 12 DSS/72 consoles
max. 36 DSS/72 consoles
max. 72 DSS/72 consoles
FF3 0 BSSC 02 Hold (0-9999) Hold
DBS 576 (USA) issued 05/20/98
FF3: Extension Programming
1=Digital Keyphone or SLT (default)
2=EM/24
3=DSS/72
FF1 0 01 0020 Hold (0 or 1) Hold
Introduction
0
Configuration
$
' $
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 3-3
System