Panasonic DBS-576 Technical Manual page 194

FF1: System Programming
Introduction
Slide Ring/Alarm Ring Timer (Day1)
(all CPCs) - Version 1.0 or higher
Set how long an incoming call will ring unanswered before moving to the
0
Slide Ring position(s) or to the Alarm Ring frequency/pattern during Day1 mode.
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Extensions
Alarm Ringing: Ringing frequency/interval changes for an incoming call that rings unanswered for
longer than the Slide Ring/Alarm Ring Timer.
Slide Ringing: A type of delayed ringing for extensions with trunk line appearances. An incoming call
FF4
on a trunk enabled for Slide Ringing (see FF2) will ring at the assigned extension or hunt group first
FF-/Soft Keys
(see Day1/2/Night Ring Assignments in FF2). Then, after the Slide Ring/Alarm Ring Timer expires,
the call will begin ringing at the extension(s) with line appearances (see FF-Key Feature Assignment
in FF4).
FF5
Related Programming:
Groups
Ring Alarm Frequency (pg. 1-106)
Ring Alarm Pattern (pg. 1-107)
Alarm Ringing (pg. 2-24) on analog CO trunks
FF6
Slide Ringing (pg. 2-25) on analog CO trunks
TRS/ARS
Alarm Ringing (pg. 2-68) on ISDN trunks
Slide Ringing (pg. 2-69) on ISDN trunks
Alarm Ringing (pg. 2-102) on T1-CO trunks
FF7 Slide Ringing (pg. 2-103) on T1-CO trunks
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 1-132
FF1 1 02 0007 Hold (0-255) Hold
(1-255 = no. of seconds):
FF1 0 21 0001 Hold (0-6) Hold
FF1 0 21 0002 Hold (0-12) Hold
FF2 1 BSSC 03 06 Hold (0 or 1) Hold
FF2 1 BSSC 03 07 Hold (0 or 1) Hold
FF2 2 BSSCC 03 11 Hold (0 or 1) Hold
FF2 2 BSSCC 03 12 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
0 = 5 seconds
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
default: 20 seconds
FF2 0 BSSC 02 13 Hold (0 or 1) Hold
FF2 0 BSSC 02 14 Hold (0 or 1) Hold
Section 400-Programming
%
,  
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B