Panasonic DBS-576 Technical Manual page 591

Section 400-Programming
Related Programming:
Introduction
SSD Code Numbering (pg. 1-22)
Trunk Access in Speed Dialing (pg. 1-23)
0
System
Configuration
SSD Names
(all CPCs) - Version 1.0 or higher
FF1 Assign names to SSD codes.
System
FF8 1 02 Hold 1 Hold Hold (SSD) Hold FLASH (Name) Hold
FF2
Trunks
Notes:
FF3
Extensions SSD Names are displayed alphabetically on Large-LCD phones.
To assign SSD Names, use the same procedure as PSD Names:
After entering the SSD Code and Hold in the above address, press FLASH to clear current data (if
FF4
any).
FF-/Soft Keys
Then press the soft key that represents the group of letters you want to choose from.
Then press one of the FF-keys on the bottom row (underneath the LCD), that is in the same position
FF5 as the letter you want to choose.
Groups
Use the * key to erase an entry. Use the # key to enter a space.
Press Hold when finished.
FF6
See figures, pg. 8-20 for instructions on entering names.
TRS/ARS
Related Programming:
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 02 0002 Hold (0 or 1) Hold
FF1 0 02 0004 Hold (0 or 1) Hold
SSD Code (Bin No.)
DBS 576 (USA) issued 05/20/98
FF8: Maintenance
/ 7  * " +++
(clears current
data)
Name for SSD Code
(up to 16 char.)
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 8-47