Ff1 0 26: Disa Id Codes - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF1 0 26: DISA ID Codes

0
System
Configuration
DISA ID Code Numbering
(all CPCs) - Version 1.0 or higher
FF1
Enter the digit length of DISA ID Codes.
System
FF2
Trunks
FF3
Extensions
Notes:
FF4
FF-/Soft Keys
DISA (Direct Inward System Access): By dialing the DISA trunk's CO phone number, an outside
caller can dial into the phone system, and have full access to all the system's features without going
through the Attendant (including the ability to transfer himself to different extensions, or dial-out on
another trunk). To set up DISA, set the Analog-CO, ISDN, or T1-CO trunk for DISA service in the
FF5
Ring Type addresses (FF2). Create DISA ID Codes and assign TRS Classes to them in FF1 0 26 0002-
Groups
0033 (see next address).
Related Programming:
FF6
Trunk COS: DISA ID Verification (pg. 1-79)
TRS/ARS
DISA ID Codes and TRS Assignments (pg. 1-114)
Ring Type - Day1/Day2/Night ...
for analog CO trunks (pg. 2-28)
FF7
for ISDN trunks (pg. 2-75)
for T1-CO trunks (pg. 2-107)
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 26 0001 Hold (0-10) Hold
FF2 0 BSSC 03 (0, 2 and 4) Hold (0-6) Hold
FF2 1 BSSC 04 (0, 2 and 4) Hold (0-6) Hold
FF2 2 BSSCC 04 (0, 2 and 4) Hold (0-6) Hold
DBS 576 (USA) issued 05/20/98
Digit Length of DISA ID Codes:
0=none/no code needed to get DISA service (default)
1=1-digit Codes
2=2-digit Codes
3=3-digit Codes
...
10=10-digit Codes
FF1 0 04 (00-15) 06 Hold (0 or 1) Hold
FF1 0 26 (0002-0033) Hold (up to 10 digits or 1-50) Hold
FF1: System Programming
/ 
Page 1-113
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B