Panasonic DBS-576 Technical Manual page 279

Section 400-Programming
Introduction
Day1 Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the analog CO trunk's delayed-ringing type during Day1 mode.
0
NOTE: Day1 Ring Type (pg. 2-28) must be either "DIL" or "Multiple
System
Configuration
Incoming" to set Day1 Delayed Ringing (DID and DISA do not apply here).
FF1
System
BSSC: Analog (CO) Trunk Position
FF2
Trunks
FF3
Extensions
Day1 Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt
FF4
.
Group, depending on the setting in the above address.
FF-/Soft Keys
FF5
Groups
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF6
C=Circuit no. 1-8
TRS/ARS
FF7
Notes:
Applications
Delayed ringing for DID trunks is set in the DID Tables (FF1 4).
Related Programming:
FF8
Day1 Ring Type (pg. 2-28)
Maintenance
Extension Number Assignment (pg. 3-4) for digital keyphones/SLTs
Extension Number Assignment (pg. 3-29) for S-point ISDN extensions
Extension Number Assignment (pg. 3-40)
Attendant HG Pilot Number (pg. 5-3)
FF5 1: Extension Hunt Groups (pg. 5-13)
Appendix A
Closed Number Table: Digit String (pg. 6-42)
SSD Numbers (pg. 8-46)
Appendix B
576-13-400
FF2 0 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF2 0 BSSC
(if "1=delay-ring to Extension")
(if "2=delay-ring to Hunt Group")
(if "3=delay-ring to SSD")
(if "4=delay-ring to Attendant")
FF2 0 BSSC 03 0 Hold (0-6) Hold
FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
DBS 576 (USA) issued 05/20/98
04 0 Hold (0-4) Hold
0=Disabled; no delayed ringing (default)
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
04 1 Hold (0-9999) Hold
Destination Number:
default: [no assignment]
FF3 2 (001-576) 00 Hold (0-9999) Hold
FF5 0 01 Hold (0-9999) Hold
FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold
FF2: Trunk Programming (Analog CO)
  %6
 !
Ext.No., Virtual Ext.No., or Closed No.
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
FF3 0 BSSC 02 Hold (0-9999) Hold
FF3 1 BSSC 01 Hold (0-9999) Hold
Introduction
$ 
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
$ 
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-31