Panasonic DBS-576 Technical Manual page 145

Section 400-Programming
Introduction
RAI Serial Port: Data Format
(all CPCs) - Version 1.0 or higher
Set data transmission format for the Remote Administration Interface (RAI) serial port.
0
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Extensions (not available in U.S.) RAI Serial Port: A serial port on the Remote Administration Interface card,
which is mounted "piggyback" on the SCC Card. The RAI serial port is for internal (300-baud) modem.
Related Programming:
FF4
FF-/Soft Keys
FF3 3: RAI Extension Port (pg. 3-45)
FF5
Groups
RAI Serial Port: Baud Rate
(all CPCs) - Version 1.0 or higher
Set data transmission speed (bits per second) for the RAI serial port.
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Notes:
Appendix A
Related Programming:
Appendix B
576-13-400
FF1 0 05 0017 Hold (0-7) Hold
FF1 0 05 0018 Hold (0-5) Hold
DBS 576 (USA) issued 05/20/98
0 = 7 bits -- even parity
1 = 7 bits -- odd parity
2 = 7 bits -- even parity
3 = 7 bits -- odd parity
4 = 8 bits -- no parity
5 = 8 bits -- no parity
6 = 8 bits -- even parity
7 = 8 bits
-- odd parity
0=300 bps
1=600 bps
2=1200 bps
3=2400 bps
4=4800 bps
5=9600 bps (default)
FF1: System Programming
%
/   "!
-- 2 stop bits
-- 2 stop bits
-- 1 stop bit
-- 1 stop bit
-- 2 stop bits
-- 1 stop bit (default)
-- 1 stop bit
-- 1 stop bit

/ 7- 
Page 1-83
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B