Panasonic DBS-576 Technical Manual page 357

Section 400-Programming
Notes:
(see
Introduction
Related Programming:
0
System
Configuration
Night Ring Type
(all CPCs) - Version 1.0 or higher
FF1 Set the T1 channel's ringing type for incoming calls during Night mode.
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
Night Ring Destination
(all CPCs) - Version 1.0 or higher
FF5
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt
Groups
Group for a "DIL" (Direct In-Line) setting in the above address.
FF6
TRS/ARS
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF7
CC=Channel no. 01-24
Applications
FF8
Maintenance
Notes:
(see
Related Programming:
Appendix A
Appendix B
576-13-400
"Day1 Ring Type/Destination" - pg. 2-107
(see
"Day1 Ring Type/Destination" - pg. 2-107
FF2 2 BSSCC
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC
"Day1 Ring Type/Destination" - pg. 2-107
(see
"Day1 Ring Type/Destination" - pg. 2-107
DBS 576 (USA) issued 05/20/98
)
04 4 Hold (0-6) Hold
0=Multiple Incoming (default)
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
04 5 Hold (0-9999) Hold
Destination Number:
Ext.No., Virtual Ext.No., or Closed No.
(if "3=DIL to Extension")
Extension Hunt Group No. (1-72)
(if "4=DIL to Hunt Group")
SSD Code No.
(if "5=DIL to SSD")
Attendant Hunt Group Pilot No.
(if "6=DIL to Attendant")
default: [no assignment]
)
FF2: Trunk Programming (T1 CO)
)
$ 
)9  %6
$ 
) !
)
Page 2-109
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B