Panasonic DBS-576 Technical Manual page 347

Section 400-Programming
Introduction
Auto-Repeat Dial
(all CPCs) - Version 1.0 or higher
Enable/Disable Auto-Repeat Dialing on the T1 channel.
0
System
Configuration
FF1
BSSCC: T1 (CO) Channel Position
System
FF2
Notes:
Trunks
Auto-Repeat Dial: Dial an outside call. If busy tone is received, press REDIAL to have the system
automatically redial the number at set intervals (max. 15 times) until the called party answers or the user
hangs up.
FF3
Extensions
Related Programming:
Flash Timer for Auto-Repeat Dial (pg. 1-117)
FF4
FF-/Soft Keys
DTMF After Answer (Link Control)
(all CPCs) - Version 1.0 or higher
FF5
For calls on this T1 channel using pushbutton (DTMF) SLT phones, set whether
Groups
DTMF signals can be sent through the system after the called party answers.
FF6
TRS/ARS
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
FF7
SS=Slot no. 01-12
Applications
CC=Channel no. 01-24
Notes:
FF8
Maintenance
Set this address to "1" (One-Way Link) to prevent double-dialing -- making an outgoing call on the
same trunk after the called party hangs up, thus bypassing TRS restrictions.
Related Programming:
DTMF/Dial Pulse Dialing (pg. 2-97)
Appendix A
Appendix B
576-13-400
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC
DBS 576 (USA) issued 05/20/98
03 04 Hold (0 or 1) Hold
0=Do not allow Auto-Repeat Dialing.
1=Allow Auto-Repeat Dialing. (default)
FF1 1 01 0003 Hold (1-255) Hold
03 05 Hold (0 or 1) Hold
0=Two-Way Link: DTMF path open
both ways. (default)
1=One-Way Link: No DTMF signaling
after the called party answers.
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold
FF2: Trunk Programming (T1 CO)
$ 
/-! 6 ,
$
54 !!,
Page 2-99
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B