Panasonic DBS-576 Technical Manual page 320

FF2: Trunk Programming (ISDN)
Introduction
Call ID Length
(all CPCs) - Version 1.0 or higher
Set the ID method by which the CO flags messages sent to the system
0
to keep track of the same inbound or outbound call.
System
Configuration
FF1
BSSC: ISDN Trunk Position
System
FF2
Trunks
Notes:
"1 byte/octet" rotates from 1 to 127 IDs. "2 bytes/octets" rotates from 1 to 32,767 IDs.
FF3
Extensions
Related Programming:
FF4
FF-/Soft Keys
Calling Number Send
FF5
(all CPCs) - Version 1.0 or higher
Groups
Set whether the system will send the "calling number" (originating phone number)
to the CO when an outgoing call is placed on this trunk.
FF6
FF2 1 BSSC
TRS/ARS
BSSC: ISDN Trunk Position
FF7
Applications
FF8
Notes:
Maintenance
Related Programming:
Calling Number Area Code (pg. 2-83)
Calling Number Office Code (pg. 2-84)
Appendix A
Calling Number Subscriber Number (pg. 2-84)
Appendix B
Page 2-72
FF2 1 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
03 12 Hold (0 or 1) Hold
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
DBS 576 (USA) issued 05/20/98
03 11 Hold
0=1 byte/octet (default for BRI)
1=2 bytes/octets (default for PRI)
0=Do not send calling number to CO.
1=Send calling number to CO. (default)
FF2 1 BSSC 09 0 Hold (up to 6 digits) Hold
FF2 1 BSSC 09 1 Hold (up to 6 digits) Hold
FF2 1 BSSC 09 2 Hold (up to 4 digits) Hold
Section 400-Programming
$
,, 59
(0 or 1) Hold
$
,, 
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400