Panasonic DBS-576 Technical Manual page 352

FF2: Trunk Programming (T1 CO)
Introduction
DTMF Conversion (Outbound Calls)
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel will switch from dial-pulse to DTMF signaling after
0
the called party answers an outbound call, according to the Call Duration Timer.
System
Configuration
FF1
System
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2
Trunks
Notes:
FF3
Related Programming:
Extensions
Call Duration Timer (analog CO) (pg. 1-118)
DTMF/Dial Pulse Dialing (pg. 2-97)
FF4
FF-/Soft Keys
DTMF Conversion (Inbound Calls)
FF5
(all CPCs) - Version 1.0 or higher
Groups
Set whether the T1 channel will switch from dial-pulse to DTMF signaling
after the extension user answers an incoming call.
FF6
TRS/ARS
BSSCC: T1 (CO) Channel Position
FF7
B=Cabinet no. 1-6
SS=Slot no. 01-12
Applications
CC=Channel no. 01-24
Notes:
FF8
Maintenance
Related Programming:
DTMF/Dial Pulse Dialing (pg. 2-97)
Appendix A
Appendix B
Page 2-104
FF2 2 BSSCC
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold
FF2 2 BSSCC
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
03 13 Hold (0 or 1) Hold
0=Do not switch to DTMF signaling.
1=Switch to DTMF signaling after the
called (outside) party answers. (default)
FF1 1 01 0005 Hold (1-255) Hold
03 14 Hold (0 or 1) Hold
0=Do not switch to DTMF signaling.
1=Switch to DTMF signaling after the
phone user answers. (default)
Section 400-Programming
$
$7 !(0#-
$ 
$7 !(0 
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B