Ff6 1 03: Trs Class: Ssd Range - Panasonic DBS-576 Technical Manual

FF6: TRS/ARS
Introduction

FF6 1 03: TRS Class: SSD Range

0
System
Configuration
Allowed SSD Range
(all CPCs) - Version 1.0 or higher
FF1
Set the highest-numbered SSD code allowed to be dialed by originators with
TRS Classes that are enabled for TRS Override on SSD Dialing (pg. 6-23).
System
FF2
Trunks
NOTE: The lowest allowed SSD code is
always 000.
FF3
Notes:
Extensions
The system will check this setting only if TRS Override on SSD Dialing (pg. 6-23) is set to 1=Allow
(the default is 0=Do Not Allow).
FF4
FF-/Soft Keys
Related Programming:
TRS Override on SSD Dialing (pg. 6-23)
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 6-24
FF6 1 03 0001 Hold (000-799) Hold
FF6 1 02 (01-50) 0002 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
Section 400-Programming
Highest-Numbered SSD Code Allowed
default: 0 (No TRS)
Introduction
0
Configuration
 #( 
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System