Panasonic DBS-576 Technical Manual page 457

Section 400-Programming
Introduction
Attendant HG/Day1 Delayed (No Answer)
Hunt Timer
(all CPCs) - Version 1.0 or higher
0
System
Set the amount of time before an unanswered call ringing an idle member in the
Configuration
Attendant Hunt Group, is forwarded to the next member during Day1.
FF1
System
FF2
Trunks
Notes:
FF3
Extensions
Related Programming:
FF4
FF-/Soft Keys
Attendant HG/Day1 Queuing Timer
(all CPCs) - Version 1.0 or higher
FF5
Set the amount of time an incoming call is queued in the Attendant Hunt Group
Groups
(waiting for a member to become available) before being forwarded to the next
hunt group or extension, during Day1 mode.
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
A call is queued in a hunt group after the idle members are tried (once each) and the remaining members
Maintenance
are busy.
If there is no assigned Next Extension/Hunt Group (see next address), intercom and network calls will
be dropped after the Queuing Timer expires. CO calls will return to "multiple CO incoming" status.
Appendix A
Related Programming:
Attendant HG/Day1 Next Extension/Hunt Group (pg. 5-6)
Appendix B
576-13-400
FF5 0 02 22 Hold (0-255) Hold
Day1
Attendant Hunt Group
FF5 0 02 23 Hold (0-255) Hold
Day1
Attendant Hunt Group
DBS 576 (USA) issued 05/20/98
Delayed (No Answer) Hunt Timer:
0=stay at idle extension (default)
1-255=no. of seconds
Queuing Timer:
0=stay in the same Hunt Group (default)
1-255=no. of seconds
FF5 0 02 24 Hold (0-9999) Hold
FF5: Groups
Introduction
$
/%%  ,
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
$
/%%  D--
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 5-5
System