Continuous Print Test (Function Code 67) - Brother DCP-7055 Service Manual

1.4.19 Continuous print test (Function code 67)

<Function>
This function allows you to conduct the pick-up and delivery test as printing patterns.
<Operating Procedure>
(1) Press the 6 and 7 buttons in this order in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the
"MAINTENANCE 67" appears on the LCD. Then press the OK button.
(2) When "SELECT: A4" is displayed on the LCD, select a relevant paper size
using or
The available paper sizes are shown below.
SELECT: A4
SELECT: LETTER
SELECT: LEGAL
SELECT: A5
SELECT: B6
SELECT: A6
(3) When "SELECT: TRAY1" is displayed on the LCD, press the
print format, and press the OK button.
The available print formats are shown below.
SELECT: TRAY1
SELECT: TRAY1 DX
(4) The "PAPER FEED TEST" appears on the LCD, and print of the continuous print pattern
with the selected pick-up test items starts.
(5) Press the Stop/Exit button to return to the machine to the initial state of the maintenance
mode.
Note:
• The test printing is stopped until there is no paper in a tray. Press the Stop/Exit button
to stop if you check the paper feeding and ejecting operations. (Printing is resumed
when paper is loaded in the tray.)
• In the case that the error occurs during test printing, the continuous print is terminated.
(If you do not press the Cancel button, printing is resumed when the error is cleared.)
• To clear the error, remove the error factors, and then press the Start button.
button, and then press the OK button.
LCD
LCD
5-28
or button. The
or button to select the
Confidential