Setting The Output Format; Switching The Video - Roland VR-50HD MK II Startup Manual

Basic Operations

Setting the Output Format

Here's how to specify the output format as appropriate for the device
that's connected.
1.
Press the [MENU] button to display the MENU screen.
2.
Touch Video < Output >.
3.
Touch < Format >.
4.
Touch a button to select the output format.
The output format switches.
5.
Press the [MENU] button to close the menu.
MEMO
5 If the output format is set to "1024x768"–"1920x1080, " video is
not output from the SDI OUT (PGM, AUX) connectors.
5 The output format of the MULTI-VIEW connector is fixed at
1080/60p.
5 The video output format of the USB STREAM port can be set by
the [MENU] button 0 System <USB Stream> 0 <Resolution>.
6

Switching the Video

Assigning video sources
Here's how to assign the video sources being input from the video
input connectors to the VIDEO INPUT SELECT [1]–[4] buttons.
1.
Press the [INPUT ASSIGN] button.
The [INPUT ASSIGN] button is lit, and the video source select
screen appears.
2.
Touch a button to select the video source (connector
name) that you want to input to Video Input 1–4.
Video Input 1
Video Input 3
3.
Press the [INPUT ASSIGN] button to close the screen.
Switching the Video
1.
Press one of the [CUT], [MIX], or [WIPE] button to select
the transition effect.
2.
If you selected mix or wipe in step 1, turn the [TIME]
knob to specify the video transition time.
3.
Press a VIDEO INPUT SELECT [1]–[4] button to select the
video.
The video is switched.
Video Input 2
Video Input 4
Button Video status
Lit red
Video is being output.
Blinking red Video is transitioning.