Video Input/Output Settings; Assigning Video Sources To Video Channels; Setting The Video Output Format - Roland VR-3EX Owner's Manual

Video Input/Output Settings

Assigning Video Sources to Video
Channels
On the VR-3EX, each video channel is provided with two or three
video input connectors. You assign the video input connector
carrying the incoming signal you want to use to each individual
video channel.
1.
Press the [IN/OUT SETUP] button.
The input/output setup screen for video
2.
Touch the switch section of the video channel you want
to set.
Video input indicator
This indicates the input status of the video signal. The indicators
for video input connectors carrying an incoming video signal
light up in orange.
* The indicator for the CH4 RGB/COMPONENT input connector is
displayed only when the connector has been selected.
3.
Turn the [VALUE] knob to select the video input
connector.
4.
Press the [IN/OUT SETUP] button to quit the setup screen.
20
is displayed.

Setting the Video Output Format

By factory default, the format of video output via the HDMI and
RGB/COMPONENT output connectors is set at "AUTO" (the setting
for automatic detection).
If you want to specify an output format of your choosing, change
the setting to match the setting on the device receiving the output
from the VR-3EX.
MEMO
• For a list of supported output formats, refer to "Output Formats"
(p. 19).
• Output video from the HDMI and RGB/COMPONENT output
connectors all has the same video format. Selecting individual
video formats for these is not possible.
1.
Press the [MENU] button to display the menu screen.
2.
Touch <VIDEO OUTPUT>.
The VIDEO OUTPUT menu is displayed.
3.
Touch <OUTPUT RESOLUTION>.
4.
Turn the [VALUE] knob to set the output format.
Set the output format to match the device receiving output from
the VR-3EX.
Value
480/576i 1080i
480/576p 720p
1080p 640×480
800×600 1024×768
1280×768 1280×1024
1366×768 1400×1050
1600×1200 1920×1200
AUTO
5.
Press the [VALUE] knob to apply the setting.
6.
Press the [MENU] button twice to quit the menu screen.
Video signal that is output
RGB/COMPONENT connector HDMI connectors
Component
HDMI
RGB
The output format is automatically set to
match the connected equipment.