Basic Operation; Turning The Power On/Off; About Sd Card - Roland VR-120HD Startup Manual

Basic Operation

Turning the Power On/Off

* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal and
does not indicate a malfunction.
* Never turn off the power or remove the USB flash drive or SD card
while the USB flash drive or SD card is being accessed.
* This unit is not designed for continuous operation over long
periods of time (one month or longer). If you want to use this unit
over long periods of time, cycle the power periodically.
Turning the power on
1.
Make sure that all devices are powered off.
2.
Turn on the [POWER] switch of the VR-120HD.
3.
Turn on the power of the source devices.
Turn on the power of the source devices that are connected to the
VR-120HD's input connectors, such as video cameras.
4.
Turn on the power of the output devices.
Turn on the power of the devices that are connected to the
VR-120HD's output connectors, such as projectors.
Turning the power off
1.
Turn off the power of the output devices first, and
then the source devices.
2.
Turn off the [POWER] switch of the VR-120HD.
The following message appears.
Shut Down?
Cancel : Press the power switch again.
3.
Press the [VALUE/CURSOR] knob to finish shutting
down.
If you wish to cancel, press the [POWER] switch again.
6

About SD Card

An SD card is required for recording audio/video or for using still
images on the VR-120HD.
SD cards that can be used on the VR-120HD
SDXC card can be used on the VR-120HD.
Some SD card types or SD cards from some manufacturers may not
properly record audio/video with the VR-120HD.
Refer to the support page on the Roland website for the latest
information on compatibility.
https://roland.cm/vr-120hd
NOTE
Before you can use a commercially available SD card with the
VR-120HD, you must format it as described in "Formatting an SD
Card".
Inserting the SD Card
1.
Push the SD card all the way
into the SDXC card slot until
you hear a click.
NOTE
Ensure that the SD card is oriented
correctly, and insert it all the way into
the port. Do not forcibly push the card
into place.
Formatting an SD Card
1.
Press the [MENU] button
Ó
Memory" select "Format" and press the [VALUE/
CURSOR] knob.
A confirmation message appears.
2.
Select "OK" and press the [VALUE/CURSOR] knob.
The SD card is now formatted.
NOTE
Formatting the SD card erases all data on the media (video and
audio data).
Removing an SD Card
1.
Press the [MENU] button
Ó
select "Eject" and press the [VALUE/CURSOR]
knob.
2.
Select "OK" and press the [VALUE/CURSOR] knob.
Once the message "The SD Card is safe to remove" is displayed on
the screen, you can safely remove the card.
3.
Push the SD card further into the slot.
4.
Hold the SD card and pull it out towards you.
Ó
"SD Card/USB
Ó
"SD Card/USB Memory"