Table of Contents
Advertisement
Basic Operations
Turning the Power On/Off
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal
and does not indicate a malfunction.
Turning the Power On
1.
Make sure that all devices are powered-off.
2.
Turn on the [POWER] switch on the VR-400UHD to turn
on the power.
3.
Turn on the power in the order of source devices
output devices.
Turning the Power Off
1.
Turn off the power in the order of output devices
source devices.
2.
Turn off the [POWER] switch on the VR-400UHD to turn
off the power.
* If you need to turn off the power completely, first turn off the unit,
then unplug the power cord from the power outlet.
Refer to "To completely turn off power to the unit, pull out the
plug from the outlet" (p. 2).
Screen (Touch Panel) Operations
Here's how to configure the video/audio settings along with the
settings for this unit by operating the screen.
1.
Press the [HOME] button or [SETUP] button.
The home screen or SETUP screen appears.
2.
Touch the screen to select the setting item that you want
to edit.
Ó
* When the scroll bar is shown:
Touch and drag up/down on the screen to scroll it.
3.
Repeat step 2 as needed.
Ó
Touching <
button returns you to the previous screen.
4.
Touch the screen or turn the [VALUE] knob to change the
setting value.
Changing numerical values
INIT
NUM
Saving your settings
The settings are saved to this unit if you don't operate the unit for
four seconds, or if you press the [HOME] button to close the screen.
> on the screen or pressing the [EXIT/ALT]
Returns the current setting item you're setting to its
default value.
Displays the numerical value popup. You can enter a
numerical value by touching the number keys.
Scroll bar
9
Advertisement
Table of Contents
