Loading Paper; Loading Paper In Tray 1 - Ricoh DDP184 User Manual

Loading Paper

Load paper into the trays according to the instructions that follow.
Special Media" on page 3-16
paper, as well as tab stock. Paper can be loaded while a print job is running, except into
the tray that is currently in use.

Loading Paper in Tray 1

WARNING!
Do not open Tray 1 if the Fuser Unit is pulled out. The printer may tip over
causing personal injury or damage to the printer.
1. Open the tray by pulling it by the handle.
2. Loosen the Thumb Screw (black knob). (Skip to Step 3 if the Thumb Screw is not
installed).
Thumb Screw
Rear Paper Guide
for directions on loading prepunched and preprinted
L
OG 0 1
OG L 0 0
See "Loading
Paper Handling 3-7