H Positioning Adjustment - Ricoh DDP184 User Manual

H Positioning Adjustment

H Positioning is set to either enable or disable for each tray. Perform adjustment
according to the following procedure.
1. From the OCP select Printer / Options / H Positioning. The following screen is
displayed.
2. Select a tray. The following screen is displayed:
3. Select Positioning or Skew Detect and set to enable or disable. .
:
NOTE
The positioning key is used for setting the H Positioning to enable or
disable. When positioning is set to disable, Skew Detect is not available.
Skew Detect is used to detect skew at the end of a long sheet of paper.
OG L 0 0
Care and Maintenance 6-71