Setting The Color Control; Cross Pattern - Ricoh DDP184 User Manual

Setting the Color Control

Due to shrinkage that can occur during the fusing process, the image size may need to
be adjusted between the front and rear printer. Follow the instructions below to adjust
image size. For additional information refer to

Cross Pattern

1. Make the following selections from the OCP:
Printer / Paper Source / Color Control / Tray Number / H Direction / Duplex /
Cross Pattern
2. When the ten-key screen is displayed, enter "1" and press enter (
will print a Cross Pattern page as shown below.
『Lead Edge』
Leading Edge
『Simplex
Simplex Path
P th』
Check 1
『Lead Edge』
Leading Edge
『Simplex
Duplex Path
P th』
3-26 Paper Handling
Front Side
Simplex Path
Simplex Path
H Direction (paper length direction)
Back Side
Duplex Path
Simplex Path
H Direction (paper length direction)
OG OG L L
page 2-12.
V Direction (paper width direction)
V Direction (paper width direction)
Check 2
0 0 0 1
). The printer
Lines printed by
the front engine
Lines printed by
the rear engine.