Ricoh DDP184 User Manual page 67

3. Adjust the size guide to the proper size. The available sizes are marked on the
tray. Use the indicator to verify the guide is locked in place.
Size Guide
4. Adjust the sensor plate to the proper size. Size markers are located on the sensor
plate in the following order:
and A4 (LEF). Verify the setting is locked into position..
:
NOTE
If the paper size you need is not listed, set the sensor plate to
position). Then, in
display.
3-8 Paper Handling
(special), B5, LGR, LGL, LTR (LEF), B4, A3,
Step 8, you will select the paper size from the OCP
OG L 0 0
Indicator
(the first
Locked
Unlocked