Loading Paper Into Paper Trays - Ricoh 407773 User Manual

Loading Paper into Paper Trays

In the following example procedure, paper is loaded into Tray 1.
• When loading paper, take care not to trap or injure your fingers.
• For details about trays that can be loaded for each paper size and type, see page 28 "Paper Size
Specifications" and page 30 "Paper Type Specifications".
• If paper jams occur frequently, flip the paper stack in the tray.
• Do not mix different types of paper in the same paper tray.
• After loading paper of the size that cannot be detected automatically, specify the paper size and
type using the control panel. When printing a document, specify the same paper size and type in
the printer driver as specified on the printer.
• Do not move the side paper guides and end paper guide forcefully. Doing so may damage the
tray.
• When loading label paper, load it one by one.
1. Pull the tray carefully until it stops, lift the front side of the tray, and then pull it out of the
printer.
Place the tray on a flat surface.
DJF214
Loading Paper into Paper Trays
35