Load the pattern using the instructions that follow.
Load a Registered Pattern
To use a registered pattern perform the following steps:
1. From the OCP make the following selections:
Printer / Paper Source / Paper Pattern / Preset Load / Tray #.
The following screen is displayed.
2. Select the desired Tray #. Use the
enter (
Clearing Preset Values
You can clear the preset values and return them to the default settings individually or
all at once using the following steps.
1. From the OCP select
Printer / Paper Source / Paper Pattern / Preset Clear / Tray #.
2. The following screen (a) is displayedPress enter (
Or, press the All Trays button to clear all trays. The following screen (b) is displayed.
Press enter (
(a)
).
) to clear all trays.
(b)
OG
L
OG
L
/
buttons to select the Pattern #, then press
) to clear the selected tray.
0 1
0 0
Paper Handling 3-31