Cleaning The Image Sensor And Multi Feed Sensor (Front And Rear Engine) - Ricoh DDP184 User Manual

Cleaning the Image Sensor and Multi Feed Sensor (Front and Rear
Engine)
1. Open the IS Cover.
2. Insert the top of the blower in the gap of the outer Paper Guide Assembly and the
Paper Guide Stay Assembly.
3. Squeeze the blower to force air into the area. Repeat approximately every 5 cm
along the width of the Paper Guide. Repeat many times around the Image Sensor
Head and the Multi Feed sensor as shown in figure.
Image Sensor Head
A
Blower
Draw ing view ed from A
6-52 Care and Maintenance
Multi Feed Sensor
(PS131 Ass'y)
Cleaning Area
IS Cover
M ulti Feed Sensor
(LD401 Ass'y)
Cleaning Area
Paper Guide S tay Ass'y
OG L
OG L
Outer Paper Guide Ass'y
Blower
Paper Guide Stay Ass'y
M ulti Feed Sensor (PS131 Ass'y)
Image Sensor Head
O uter Paper Guide Ass'y
Blower
0 1
0 0