Registering A Paper Pattern - Ricoh DDP184 User Manual

3. Press the Details button. The screen on the left is displayed.
4. Set the desired items (Paper Size, Paper Type, Paper Weight, Tray Adjust, etc.) as
desired. Use the more (
:
NOTE
Refer to
Refer to
Refer to
Refer to
5. When you are finished, press return (
"Processing". When processing is complete press
Register your pattern using the instructions below.

Registering a Paper Pattern

1. To register a paper pattern make the following selections from the OCP:
Printer / Paper Source / Paper Pattern / Preset Register / Tray # / Pattern #
The display will appear like the samples below but will show the selected pattern
settings on the right side of the display. Use the more (
between the screens and verify all settings are correct.
2. Press enter (
Processing. When processing is complete press
3-30 Paper Handling
) button to toggle between the screens.
page 3-21
for Tray Adjust instructions.
page 3-26
for Color Control instructions.
page 6-66
for Detach Voltage instructions.
page 6-71
for H Positioning
) from either screen to register the pattern.The display will indicate
OG L
OG L
), then enter ( ). The OCP will indicate
to return to the main menu.
) button to toggle
to return to the main menu.
0 1
0 0