Replacing The Toner Collector Bottle - Ricoh DDP184 User Manual

Replacing the Toner Collector Bottle

When the OCP displays the message Toner Bottle Full, replace the Toner
Collector Bottle with a new empty bottle.
1. Open the Toner Collector Bottle Cover and the Inner Cover. (The Toner Cover
Door is located at the right side of the printer next to the MBT.)
2. Remove the old Toner Collector Bottle.
Inner Cover
Install
Front Engine
3. Remove the cap from the side of the Toner Collection Bottle and place it on top of
the bottle to seal it.
4. Install a new Toner Collector Bottle. (See illustration for Step 2.)
5. Close the Inner Cover and the Toner Collector Bottle Cover.
6-8 Care and Maintenance
Toner Collector Bottle Cover
Empty Toner Bottle
Remove
OG L
Toner Collector Bottle Cover
Empty Toner Bottle
Cap
0 0
Inner Cover
Rear Engine