Canceling A Print Job - Ricoh DDP184 User Manual

If the printer status is Pause/Offline, touch
powering off.
NOTE
1.Do not turn off the printer power during "Preserving Parameters".
2.Turning off the printer power immediately after having printed for a
long time in high temperature environment (two hours or more in 28
or more) might cause trouble by raising the temperature inside the
printer. In such a case, turn off the printer power 20 minutes or more
after finishing the print.

Canceling a Print Job

If an error condition exists, you may need to cancel the print job(s).
1. Canceling a job in the DDP Server
Please refer to "DocXPLORER Reference Guide" for instructions on canceling a
job that has been spooled to the DDP Server but has not yet begun to print. The
DocXPLORER Reference Guide can be found on the User's Documentation CD.
2. Canceling a job in the printer
To cancel a job that has been sent to the printer or has already been spooled in the
printer, access the Jobs menu on the OCP. This also cancels the job in the DDP
server.
Pause/Resume a Print Job
If an error condition exists, you may want to pause and resume the print job(s).
Please refer to "DocXPLORER Reference Guide" for instructions on pausing and
resuming a print job. The DocXPLORER Reference Guide can be found on the User's
Documentation CD.
Ready
:
OG
OG
(Note2)
to return printer to a Ready status before
L 0 1
L 0 0
℃
Printer Overview 1-11