Ricoh DDP184 User Manual page 7

Manual Rev. Machine Rev.
(03) -
Page No.
4-35(01): Deleted "Network I/F" in "Channel
Source" in the Table. Changed the descriptions of
"VPT", "PDL Source".
5-3(01): Changed "Basic Troubleshooting Tips".
(Deleted information of MicroPress.)
5-4(01):Changed the reference pages.
5-5(01):Changed the reference pages.
5-6(01): Changed the reference pages.
5-8(01): Delete the contents of "Booklet Finisher
Error Codes (Option)".
5-10(0): Delete Booklet Finisher Error Codes
(Option)"".
5-11(01) - 5-13(01), 5-14(02), 5-20(01):
Deleted "Booklet Stacker "Booklet Stacker Full
Remove Booklets", "Booklet Stacker Full Remove
Paper", "Inserter Load xxx", "Invalid Combination
#1 Cancel Job", "Invalid Combination #2 Cancel
Job", "Invalid Folder #xx Clear Paper Path",
"Invalid Folder #xx Cancel Job", "Paper in Fin
Holding Path Remove Paper", "Paper in Fin
Sheet Path Remove Paper", "Paper in Sheet
Inserter 1 Remove Paper", "Paper in Sheet
Inserter 2 Remove Paper", "Paper Jam Connect-
ing Unit Remove Paper", "Paper Jam Connecting
Unit Remove Paper", "Paper Jam Fin Bypass
Remove Paper", "Paper Jam Fin Exit Remove
Paper", "Paper Jam Fin Folder Remove Paper",
"Paper Jam Fin Sheet Path Remove Paper",
"Paper Jam Sheet Inserter 1 Remove Paper",
"Paper Jam Sheet Inserter 1 Remove Paper",
"Paper Jam Sheet Inserter 1 Remove Paper",
"Paper Jam Sheet Inserter 2 Remove Paper",
"Paper Jam Sheet Inserter 2 Remove Paper",
"Paper Jam Sheet Inserter 2 Remove Paper",
"Paper Out Sheet Inserter 1 Load xxx", "Paper
Out Sheet Inserter 1 Load xxx", "Paper Out Sheet
Inserter 2 Load xxx", "Sheet Inserter 1 Open
Close Tray", "Sheet Inserter 2 Open Close Tray",
"Trimming Trash Box Full Empty Box",
"Trimming Trash Box Not Set Check Box",
"Trimming Unit Not Set Check Unit".
Added "IM#XX" into "Call for Service Exxx or
other text", (Note x) into "Paper Unmatch Check
Paper Information", "PM Counter Exceeded",
"Note 1" - "Note2". (PM Exceeded -> Note 2 PM
Counter Exceeded.)
6-2(01) - 6-3(01) :
*Delete the column of "Fuser" in Table.
6-4(01) - 6-5(01): Added the explanation of 2.
Date
(Apr.2006)