Ricoh DDP184 User Manual page 49

Level 1 Level 2 Level 3
Printer Paper Paper Weight
Source
Tray Adjust
Color Control
Paper Pattern
Options Wait Timeout
LPD Queuing
Duplex
Always
Print Density
Detach
Voltage
Heat Roller
Tmp
Laser Power
Adjust
DBL Feed
Detect
H Positioning
Note 1: This menu is available only when the HCF is installed.
Note 2: This menu is displayed only when the Container Stacker is installed.
Note 3: This menu is not displayed when the MBT is selected.
2-16 Operator Control Panel
Table 2-3. Printer Menu Structure - Continued
Level 4
1, 2, 3, MBT
64-163gm
HCF (Note 1)
Front, Back
1, 2, 3, MBT
HCF (Note 1)
1, 2, 3, H Direction,
HCF (Note 1) V Direction
Preset Load, 1, 2, 3, MBT,
Preset HCF (Note 1),
Register, Default
Preset Clear
0 seconds
Enable/Disable
Disable
Front, Rear Light / Simi-Light / Middle / Semi-Dark /Dark
Front, Rear 1,2,3,MBT,
HCF(Note 1),
All Trays
Front, Rear Low, Normal, High
Front, Rear Laser1, Laser2, Default
Enable/Disable
1,2,3,MBT, Positioning
HCF(Note 1) Skew Detect
OG L
OG L
Level 5 Level 6
2
(35-90 lb. index, 17-43 lb. bond)
x, y -0.25 - +0.25inch / -6.3 - +6.3mm
Simplex R : Front Side
Duplex F : Front Side,
F : Back side
R : Front Side,
R: Back side
Pattern1-16 Paper Size.
Paper Type,
Paper Weight,
Tray Adjust,
Color Control (Note 3),
Detach Voltage,
Paper Color,
H Positioning (Note 3)
Front1, Front2, Back1 (Note 3), Back2 (Note 3),
Default
Enable/Disable
Enable/Disable
0 2
0 0
Level 7 Level 8
0.12%/0.24%/
0.36%/0.48%/
0.60%
0%/0.12%/
0.24%/0.36%/
0.48%/0.60%
0.12%/ 0.24%/
0.36%/0.48%/
0.60%