Exhausting The Developer Mix - Ricoh DDP184 User Manual

Exhausting the Developer Mix

1. Take the empty developer bottle out of the box.
2. Open the Front Cover of the printer.
3. Attach the empty developer bottle to the Developer Unit Duct so that the slot of
the bottle fits the projection of the duct.
4. Lock the empty developer bottle by turning the developer bottle cap about 160
degrees in the direction shown below.
CAUTION
Hold the developer bottle when you turn the cap so that the bottle is not
turned together with the cap.
6-10 Care and Maintenance
!
L
OG OG L
160°
0 0 0 1
Projection
Slot