Ricoh DDP184 User Manual page 70

3. Adjust the sensor plate to the proper size. Size markers are located on the sensor
plate in the following order:
A4.
:
NOTE
If the paper size you need is not listed, set the sensor plate to
position). Then, in
display.
.
4. Place the paper into the tray.
:
NOTE
The paper should be loaded no higher than the Max. level indicator. The
Max. level indicator is located inside the tray.
5. Close the tray.
6. If you set the sensor plate to
making the following selections:
Printer/Paper Source/Paper Size/Tray Number/Paper Size
(special), B5, A5, LGR, LGL, LTR, B4, A3, and
Step 8, you will select the paper size from the OCP
in Step 3, select the paper size from the OCP by
OG L 0 0
(the first
Paper Handling 3-11