Printer Menu; Paper Source Options - Ricoh DDP184 User Manual

Printer Menu

When you select Printer from the Main Menu, this screen is displayed. You use the
Printer Menu to gain access to the printing options described below. See
beginning on page 2-15

Paper Source Options

Default
Use this when the paper source is not designated by a host command. If a
command from the host defines the paper source, the OCP setting is ignored.
Paper Size
When Paper Size is selected the paper size of the currently selected paper source
is displayed. To use the OCP to set the paper size to something other than the
predetermined sizes in the paper tray, set the sensor plate in the paper tray to "
then select Paper Size on the OCP.
Paper Type
When Paper type is selected the currently selected paper type is displayed. Press
the option buttons to select the desired paper type. See
page 2-15
Paper Color
When Paper Color is selected the currently selected paper color is displayed.
Press the option buttons to select the desired paper color.
page 2-15
Paper Weight
When Paper Weight is selected the currently selected paper weight is displayed.
Press the option buttons to set the desired paper weight. See
on page 2-15
Tray Adjust
The print position can be adjusted vertically and horizontally using the Tray
Adjust option. The white arrow on the Tray Adjust screen indicates paper feed
direction. The adjustment can be set to millimeters or inches and the range is -6.3
to +6.3 millimeters (-0.25 to +0.25 inches) in increments of 0.1 millimeter (0.01
inch). Difference positions can be set for front and back side in duplex printing
mode.
for the complete Printer Menu structure.
for a list of paper type options.
for a list of paper color options.
for a list of paper weight options.
OG L
OG L
Table 2-3 beginning on
Table 2-3 beginning on
Operator Control Panel 2-11
0 1
0 0
Table 2-3
",
Table 2-3 beginning