Passwords - Ricoh DDP184 User Manual

Passwords

Passwords provide security to restrict access to system parameters and certain printer
maintenance functions. Two types of passwords are available with your printer: a
system password and a service password.
The system password is used by your System Administrator and provides access to the
system parameters. The service password is used by your Service Technician and
provides access to service and maintenance functions, as well as the system parameters.
The passwords are not set at the factory and should be set up at installation.
1. To set up or change the service password make the following selections from the
OCP:
Setup / Service
The ten-key pad will appear.
2. If you are setting the password for the first time press Enter ( ), or
If you are changing the password, use the ten-key pad to enter the current pass-
word, then press Enter ( ).
3. Select Passwords from the menu.
4. Enter a new password using the ten-key pad then press Enter ( ).
5. Re-enter the password and press Enter ( ). The display will indicate that the
password has been changed.
CAUTION
If the password is lost or forgotten it cannot be recovered. In that case,
replace the HDD.
!
OG L
OG L
Operator Control Panel 2-25
0 1
0 0