Ocp Display Messages - Ricoh DDP184 User Manual

OCP Display Messages

The OCP displays the printer status with 1- to 2-line messages. There are three types of
messages: status, warning, and error messages. The following table lists the messages
in alphabetical order. Each message is explained and a corrective action is given when
applicable.
For information on messages not explained here, please refer to your option-specific
user's guide.
Message
Any Tray Except MBT
Call for Service
Exxx or other text
Center Guide Open
Close Guide E040
Center Cover Open
Close Guide E041
Clearing Error
Container x Top Cover Open
Close Cover
Container x V Path Cover Open
Close Cover
Creating Software Log
CS1 Lower Basket Size
Change Basket E092
CS1 Upper Basket Size
Change Basket E093
CS2 Lower Basket Size
Change Basket E094
CS2 Upper Basket Size
Change Basket E095
Deleting Jobs
Developer Bottle Not Set
Set Developer Bottle E01E
Developer Charge
E0A1
Developer Discharge
E0A2
Developer Error
Check Color E049
Developer Error
Retry Exhausting E048
Description
The wrong size paper is loaded except
in the MBT
Any "Call for Service" message requires
a service call for problem resolution.
Line 2 is the error code.
Self-explanatory.
Self-explanatory.
Status message.
The top cover of the container is open.
x is the container number.
The v path cover of the container is
open. x is the container number.
Status message. The printer is
creating the requested software log.
The stacker basket is the wrong size
for the requested paper size
The stacker basket is the wrong size
for the requested paper size
The stacker basket is the wrong size
for the requested paper size
The stacker basket is the wrong size
for the requested paper size
Status message. The selected jobs are
being deleted from the print queue.
The developer bottle is not seated
properly.
Replacement of the developer is
running.
Replacement of the developer is
running.
The color is different between the toner
unit and the developer unit.
An error occurred when operating the
developer.
OG L
OG L
Corrective Action
Load any tray except the MBT with the
requested paper size.
See "E2XX, EC#XX, BR#XX, IM#XX
Call for Service Error" on page 1-13.
Contact your authorized Service
Technician and provide the error code
displayed on the OCP.
Close the guide.
Close the cover.
Wait for the printer to return to a Ready
state.
Close the cover.
Close the cover.
Wait for the printer to return to a Ready
state.
Change the basket.
Change the basket.
Change the basket.
Change the basket.
Wait for the printer to return to a Ready
state.
Reseat the bottle.
Wait for the printer to return to a Ready
state.
Wait for the printer to return to a Ready
state.
Check the toner and developer units
and replace the incorrect unit.
Retry. If the error occurs again, contact
an authorized Service Technician.
0 1
0 0
Troubleshooting 5-11