Optical Drive Blank - HP ProLiant DL60 Gen9 Maintenance And Service Manual

If removing a FBWC module from an expansion board in slot 2, remove the PCI riser assembly first
5.
before disconnecting the cache module cable.
For information on FBWC cabling, see "FBWC cabling (on page 91)".
Disconnect the cache module backup power cable from the cache module.
6.
Remove the cache module.
7.
To replace the component, reverse the removal procedure.

Optical drive blank

To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Removal and replacement procedures 38