3.12.3 LCD Test
This mode displays two test patterns in LCD.
1. Press Program key, *, B(02). Then press One-touch C.
LCD Test
Pressing START, all dots turn on.
Next pressing START, all dots turn off.
Finally pressing START, the alphabetical characters are shown in the LCD.
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
2. Press STOP to exit the test mode.
3.12.4 Key Panel Test
1. Press Program key, *, B(02). Then press One-touch D(04).
Key Panel Test
2. As each button on the keypad is pressed, a representative name as show in the following table will be
displayed.
Key
DOCUMENT
RESOLUTION
CONTRAST
DOCUMENT SIZE
PAPER SIZE
NEXT DOC
CANCEL
ENTER
COPY/FAX
P (Program key)
SPEED DIAL
/TEL INDEX
REVIEW
COMMANDS
3. Press STOP twice to cancel the key panel test.
Indication in LCD
Document/Resolution
Contrast
Doc Size
Paper Size/Next Doc
Cancel
Enter
Copy/Fax
Program
Speed
Review Command
Key
COPY RESET
START
STOP
Soft key 1, 2 and 3
REDIAL/PAUSE
DIALING
OPTIONS
BROADCAST
GROUP
ADVANCED
FUNCTIONS
MACRO PROGRAM
Macro keys
Numeric keys 0
through #
One-touch keys 01
through 55
Programmable One-
touch keys P1 and
P2
3-69
Indication in LCD
Copy Reset
Start
Stop
Soft Key 1, 2 and 3
Redial
Dialing Op.
Broadcast
Group
Advanced Functions
Macro program
M1 and M2
0 through #
[01] through [55]
[P1] and [P2]