Section 6 Options; Memory Upgrade; Packaging Contents; Installation - Muratec MFX-1300 Field Engineering Manual

Section 6
Options

6.1 Memory Upgrade

An optional 8 MB document memory upgrade is available for the MFX-1300/MFX-1200.
An optional 8 MB or 24 MB document memory upgrade is available for the MFX-1700/MFX-1600.

Packaging contents:

(1) Memory PCB.........................1
(2) Spacer...................................1

Installation

1. Turn the fax machine off and remove the power cord and telephone line cord.
2. Remove the REAR COVER and then remove the SHIELD PLATE.
3. Attach the SPACER to the expansible MEMORY PCB.
4. Connect the MEMORY PCB to the connector (P16) on the unit's Main control PCB.
Memory PCB
Spacer
MFX-1300/MFX-1200 MFX-1700/MFX-1600
5. Plug the power cord and turn the unit on.
6. Clear the DRAM backup (Press Program key, *, G(07), ENTER).
Important: The DRAM clear setting will erase all documents in memory.
7. Perform a DRAM check whenever an optional memory upgrade is added to the unit.
(Press Program key, *, B(02), F(06). See page 3-68 for more detail of the DRAM check.)
6-1