Muratec MFX-1300 Field Engineering Manual page 36

Machine Parameter A:7
Initial
Switch
Setting
7 0 DRAM capacity indication
(This switch can indicate
6 0
8 to 64 MB memory capacity)
5 0
4 0
3 0
2 0
1 0
0 1
Machine Parameter A:8 and A:9 --- Factory use only
Machine Parameter B:0
Initial
Switch
Setting
7 * Leading edge document
margin adjustment
6 *
(FBS)
5 *
4 *
Adjusts the leading edge
3 *
margin from standby position
2 *
of the mirror carriage to the
1 *
start of the scanning position.
0 *
Each setting changes
by 0.847mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Adjust
This switch indicates the DRAM capacity.
This switch is read only, do not set any character.
You can see the memory capacity by how many "1"
is indicated on the LCD.
For example, if the two "1" is indicated,
i.e. "00000011", the DRAM capacity is 16MB.
Similarly, "00001111" means 32MB capacity.
Adjust
Switch 76543210
3-6
Usage/Comments
Usage/Comments
Settings
00000000 0.00 mm
00000001 0.847 mm
00000010 1.694 mm
00001100 10.164 mm
(MFX-1700/MFX-1600)
11111110 215.138 mm
11111111 215.985 mm
Initial setting
(MFX-1300/1200)
Initial setting