Muratec MFX-1300 Field Engineering Manual page 116

2-1. The LCD now shows the Consumable order sheet setting menu and Service report setting menu.
Set Order Sheet
Print Order Sheet
Reset Order Sheet
Set Send SvcReport
Reset Send SvcReport
To set the consumable order sheet, proceed to step 3-1.
To print the consumable order sheet, proceed to step 4-1.
To clear the consumable order sheet setting, proceed to step 5-1.
To set the service report settings, skip to step 6-1.
To clear the service report, skip to step 7-1.
Consumable order sheet settings
3-1. Select "Set Order Sheet" then press ENTER. the
Dealer Fax #:
_
Enter the dealer's fax number. The fax number can be up to 20 characters in length.
The consumable order sheet will be sent to this fax number when "Transmit" is selected in the
"Order Sheet" setting in step 3-13.
3-2. Press ENTER to save the dealer's fax number and continue. The LCD will show:
Dealer Tel #:
_
Enter the dealer's phone number. The phone number may be up to 20 characters in length.
3-3. Press ENTER to save the dealer's phone number and continue. The LCD will show:
Out of Toner
# (000-100):050
Enter the number of pages which the machine can print after appearing the "Toner Low" message.
The number can be up to 100.
3-4. Press ENTER to save the number of pages and continue. The LCD will show:
End Drum Life
# (000-999):500
Enter the number of pages which the machine can print after appearing the "Drum Near End" message.
The number can be up to 999.
3-5. Press ENTER to save the number of pages and continue. The LCD will show:
CntDownDisplay
!/"/Enter
Determine if the LCD displays the remaining pages which can be printed after "Toner Low" or "Drum
Near End" message appeared.
Select "ON" or "OFF" to activate/inactivate the consumables countdown display settings.
! "
/ /Enter
:Off
3-86
will show:
LCD